١- استانداردهای ملی ایران (ISIRI):
- استاندارد ملی شماره ۴۲۳ - لولههای فولاد كربنی مناسب برای دنده پیچ كردن مطابق ISO۷-۱
- استاندارد ملی شماره ۴٣٣ – اندازههای مخازن فرآوردەهای نفتی
- استاندارد ملی شماره ١٢١٩- آبگرمکن گاز سوز مخزن دار برای مصارف خانگی-ویزگی ها و روشهای آزمون
- استاندارد ملی شماره ٢-١٢١٩ - آبگرمكن گاز سوز مخزن دار- ویژگیها و روش های آزمون مصرف انرژی و دستورالعمل برچسب انرژی
- استاندارد ملی شماره ١-١٢٢٠ - بخاری گازسوز دود کش دار- ویژگیها و روشهای آزمون
- استاندارد ملی شماره ٢-١٢٢٠ - بخاری گاز سوز دودكش دار مشخصات فنی و روش تعیین معیار مصرف انرژی ودستور العمل بر چسب انرژی
- استاندارد ملی شماره ١٢٢٨ – آبگرمکنهای نفتی
- استاندارد ملی شمارة ١ - ۱۵۶۲ - وسایل برقی- خانگی- ایمنی -الزامات
- استاندارد ملی شمارة ٢١-٢-١۵۶٢ - وسایل برقی خانگی و مشابه - الزامات ویژە آبگرمکنهای برقی مخزن دار
- استاندارد ملی شمارة ۳۵-٢-۱۵۶۲ - وسایل برقی خانگی و مشابه - الزامات ویژە آبگرمکنهای فوری
- استاندارد ملی شماره ۴۰-٢-۱۵۶۲ - وسایل برقی خانگی ومشابه -ایمنی - الزامات ویژه پمپهای گرمایی،دستگاههای تهویه مطبوع و رطوبت گیرهای الکتریکی
- استاندارد ملی شماره ٥٣-٢-۱۵۶۲ - وسایل برقی خانگی ومشابه -ایمنی - الزامات ویزه وسایل كرمازای سونا و كابین های مادون قرمز
- استاندارد ملی شمارة ٢-۱۵۶۲ - آبگرمکنهای برقی خانگی -مشخصات فنی و روش آزمون تعیین معیار مصرف انرژی و دستور العمل بر چسب انرژی
- استاندارد ملی شماره ١٧٩٨ - دندہ پیچهای لولههای گاز و اتصالهای نوع پیچی برای موادیكه آب بندی توسط دنده پیج صورت میگیرد
۔ استاندارد ملی شمارہ ١٨٢٨ - آبگرمکن گاز سوز فوری دیواری برای مصارف خانگی ویژگی ها و روشهای آزمون
- استاندارد ملی شماره ٢-١٨٢٨ - آبگرمكن فوری گاز سوز - مشخصات فنی و روش تعیین معیار مصرف انرژی و دستور العمل بر چسب انرژی
- استاندارد ملی شماره ٣٣۶٣ - شیرهای کشویی چدنی - ویژگی ها
- استاندارد ملی شمارہ ٣۵٢٧ - ویژگیها و روشهای آزمون شاخص پیچشی مخزن نفت آبگرمکن و بخاری (دود کشدار)
- استاندارد ملی شماره ۴۰۷۱ - شیرهای یکطرفه چدنی برای مصارف عمومی - ویژگی ها
- استاندارد ملی شمارہ ۴٢٣١ - طراحی و ساخت دیگهای بخار و آب داغ از نوع پوسته ای با ساختمان جوش شده
- استاندارد ملی شمارہ ۴۴٧٣ - دیگ چدنی شوفائ مخصوص گرمایش مرکزی و آب گرم مصرفی
- استاندارد ملی شماره ۴۸۴۱ - شیرهای پروانه ای
- استاندارد ملی شماره ٢-۴۹۱۰ - کولر آبی خانگی -مشخصات فنی و روش آزمون تعیین معیار مصرف انرژی و دستورالعمل بر چسب انرژی
- استاندارد ملی شماره ۵۳۶۳ - پکیجهای گاز سوز گرمایش مرکزی پکیجهای نوع مجهز به مشعلهای اتمسفر یک با توان ورودی اسمی حداكثر ٧٠ كیلو وات.
- استاندارد ملی شماره ٢-۶٠١۶ - کولر گازی و یا پمپ گرما از نوع اتاقی بدون كانال (سرد و یا سرد و كرم) - روش اندازه كیری مصرف انرژی و دستور العمل برچسب انرژی
- استاندارد ملی شماره ۶٧٧١ - لولههای فولادی برای آبرسانی و فاضلاب
- استاندارد ملی شمارہ ۶٩۴٢ - کولر گازی و/ یا پمپ گرمای هوا به هوا با کانال (سرد و/ یا سرد و گرم) - روشهای آزمون تعیین مقادیر عملكرد
- استاندارد ملی شماره ١-۶۹۸۵ - سیستمهای سرمایشی ویمب های گرما الزامات ایمنی وزیست محیطی-قسمت اول: الزامات پایه، تعاریف و اصطلاحات، طبقه بندی وانتخاب معیارها
- استاندارد ملی شماره ٢-۶۹۸۵ - سیستمهای سرمایشی وپمپهای كرما- الزامات ایمنی و زیست محیطی قسمت دوم: طراحی، ساخت، آزمایش، نشانە گذاری و مستندسازی
- استاندارد ملی شماره ٣-۶۹۸۵ - سیستمهای سرمایشی ویمپهای كرما- الزامات ایمنی و زیست محیطی قسمت سوم: محل نصب و حفاظت شخصی
- استاندارد ملی شماره ٣-۶۹۸۵ - سیستمهای سرمایشی ویمپهای كرما- الزامات ایمنی و زیست محیطی قسمت چهارم: بهره برداری، حفظ و نگهداری، تعمیر و بازیافت
- استاندارد ملی شماره ٧٢۶٨ - بخاری گازسوز بدون دود کش - ویژگیها و روشهای آزمون
- استاندارد ملی شماره ٢-٧٢۶٨ - بخاری گازسوز بدون دودكش - مشخصات فنی - و روش تعیین معیار مصرف انرؤی ودستور العمل تاییدیه انرژی
- استاندارد ملی شماره ٢-۷۳۴۲ - معیارها ومشخصات فنی مصرف انرژی وبر چسب انرژی بخارهای برقی خانگی و مشابه
- استاندارد ملی شماره ١-٧۶٩۶ - آزمونهای مقاومت در برابر آتش - دمپرهای ضد آتش در سیستم های توزیع هوا ، هدایت و پخش هوا - قسمت اول : روش آزمون
- استاندارد ملی شماره ٣-٧۶٩۶ - آزمون های مقاومت در برابر آتش- دمپرهای ضد آتش در سیستم های توزیع هوا،هدایت و یخش هوا - قسمت سوم:راهنمای استفاده از روش آزمون مندرج در قسمت اول
- استاندارد ملی شماره ۵-٧۶٩۶ - آزمون های مقاومت در برابر آتش -دمپرهای آتش برای
سیستم های توزیع هوا- قسمت ۵-دمپرهای انبساطی آتش
- استاندارد ملی شماره ٧٩١١ - دیگهای فولادی ، با ساختمان جوش شده ، مخصوص گرمایش مركزی و تامین آب گرم مصرفی (به طور غیر مستقیم) با ظرفیت حرارتی ۴۴ كیلو وات تا ٣ مگا وات -ویژگیها و روشهای آزمون
- استاندارد ملی شماره ١-٩٣٣٠ - لولههای فولادی جوش داده شده برای مقاصد تحت فشار - شرایط فنی تحویل -قسمت ١-لولههای فولادی غیر آلیاژی با خواص مشخص شده در درجه حرارت اتاق
- استاندارد ملی شماره ٢-٩٣٣٠ - لولههای فولادی درز جوش برای مقاصد تحت فشار –شرایط فنی تحویل -قسمت ٢- لولههای فولادی غیر آلیاژی وآلیاژی درز جوش به روش مقاومت الكتریكی و القایی با خواص مشخص در دمای بالا
- استاندارد ملی شماره ٣-٩٣٣٠ - لولههای فولادی درز جوش برای مقاصد تحت فشار –شرایط فنی تحویل -قسمت ٣- لولههای فولادی غیر آلیاژی و آلیاژی درز جوش به روش مقاومت الکتریکی و القایی با خواص مشخص در دمای پایین
- استاندارد ملی شماره ۴- ٩٣٣٠ - لولههای فولادی جوش داده شده برای مقاصد تحت فشار - شرایط فنی تحویل -قسمت ٢-لولههای فولادی غیر آلیاژی وآلیاژی جوش داده شده قوسی زیر پودری با خواص مشخص شده در درجه حرارت بالا
- استاندارد ملی شماره ۵- ٩٣٣٠ - لولههای فولادی جوش داده شده برای مقاصد تحت فشار- شرایط فنی تحویل - قسمت ۵- لولههای فولادی غیر آلیاژی وآلیاژی جوش داده شده قوسی زیر پودری با خواص مشخص شده در درجه حرارت پایین
- استاندارد ملی شماره ١٠۶٣۵ - برجهای خنک كن تر مشخصات فنی و روش آزمون تعیین معیار مصرف انرؤی ودستور العمل بر چسب انرژی
- استاندارد ملی شماره ١٠۶٣٨ - کولرهای گازی و یا پمپهای گرما دو تکه (اسپلیت ) سرد و یا سرد و گرم (بدون کانال)مشخصات فنی و روش آزمون تعیین معیار مصرف انرژی و دستور العمل بر چسب انرژی
- استاندارد ملی شماره ١١٠٠۵ - دیگهای گرمایش مرکزی گاز سوز-الزامات خاص برای تولید آب گرم مصرفی توسط سیستم گرمایش تلفیقی با توان ورودی اسمی حداكثر ٧٠ كیلو وات
استاندارد ملی شماره ٢-۱۱۵۶۳ - جوشكاری وفرآیند های وابسته-آماده سازی اتصال- قسمت٢-جوشکاری قوسی زیر پودری فولادها
- استاندارد ملی شماره ١٢١١٨ - وسایل نفت سوز - مقررات عمومی برای ساخت
- استاندارد ملی شماره ١٢١١٩ - وسایل نفت سوز- مقررات عمومی و روشهای آزمون
- استاندارد ملی شماره ١٢١٢٠ - بخاری های نفت سوز نوع باز با تهویه طبیعی- ویزكی ها و الزامات ساخت
- استاندارد ملی شماره ۱۲۱۵۶ - پکیجهای گاز سوز گرمایش مركزی نوع C با توان ورودی اسمی حداكثر ٧٠ كیلو وات
- استاندارد ملی شماره ١ -١٢٧۵٣ - سیستم لولههای چند لایه برای لوله کشی آب سرد و گرم داخل ساختمان - قسمت ١- اصول کلی
- استاندارد ملی شماره ٢ - ١٢٧۵٣ - سامانههای لوله گذاری لولههای چند لایه برای تاسیسات آب سرد و گرم داخل ساختمان -قمست دوم -لولهها
- استاندارد ملی شمارہ ٣-١٢٧۵٣ - سیستم لولههای چند لایه برای لوله کشی آب سرد و گرم داخل ساختمان - قسمت ٣-اتصالات
- استاندارد ملی شماره ۵-١٢٧۵٣ - سیستم لولههای چند لایه برای لوله کشی آب سرد و گرم داخل ساختمان - قسمت -٥ همخوانی مجموعه لوله و اتصال با شرایط كاربری
- استاندارد ملی شماره ١-١٣٢٠٥ - پلاستیكها- سیستم های لوله كشی برای تاسیسات آب سرد وگرم - پلی اتیلن با پیوند عرضی (pe-x )قسمت ١ - اصول كلی
- استاندارد ملی شماره ٢-١٣٢٠٥ - پلاستیكها- سیستم های لوله كشی برای تاسیسات آب سرد وگرم - پلی اتیلن با پیوند عرضی(pe-x ) قسمت ٢- لولهها
- استاندارد ملی شماره ٣-١٣٢٠٥ - پلاستیكها - سیستم های لوله كشی برای تاسیسات آب سرد وگرم - پلی اتیلن با پیوند عرضی (pe-x) قسمت ٣- اتصالات
- استاندارد ملی شماره ٥-١٣٢٠٥ - پلاستیكها- سیستم های لوله كشی برای تأسیسات آب سرد وگرم - پلی اتیلن با پیوند عرضی pe-x)) قسمت ٥-همخوانی مجموعه لوله واتصال با شرایط كاربری
- استاندارد ملی شماره ١-١٣٢٥٢ - پلاستیكها- سیستم های لوله كشی برای تاسیسات آب سرد وگرم - پلی اتیلن مقاوم در دمای بالا pe-rt) ) قسمت ١- اصول كلی
- استاندارد ملی شماره ٢-١٣٢٥٢ - پلاستیكها - سیستم های لوله كشی برای تاسیسات آب سرد و گرم - پلی اتیلن مقاوم در دمای بالا pe-rt) ) قسمت ٢- لولهها- ویژگی ها
- استاندارد ملی شماره ٣-١٣٢٥٢ - پلاستیكها- سیستم های لوله كشی برای تاسیسات آب سرد وگرم - پلی اتیلن مقاوم در دمای بالا pe-rt) ) قسمت ٣- اتصالات - ویژگیها
- استاندارد ملی شماره ٥-١٣٢٥٢ - پلاستیكها- سیستم های لوله كشی برای تأسیسات آب سرد وگرم - پلی اتیلن مقاوم در دمای بالا pe-rt) ) قسمت ٥- همخوانی مجموعه لوله و اتصالات با شرایط كاربری
- استاندارد ملی شماره ۱۴۵۵۳ - پکیجهای گاز سوز گرمایش مرکزی - الزامات ویژه برای پکیجهای چگالشی با توان ورودی اسمی حداكثر ٧٠ كیلو وات
ASME(American Society of Mechanical Engineers)
- B ۱۶.۳ Malleable Iron Threaded Fittings, Classes ۱۵۰ & ۳۰۰
- B۱۶.۵ Pipe Flanges and Flanged Fittings NPS ۱/۲ through NPS ۲۴.
- B۱۶.۹ Factory Made Wrought Steel Buttwelding Fittings.
- B۱۶.۱۰Face-to-Face and End-to-End Dimensions of Valves
- B۱۶.۱۱ Forged Fittings, Socket-welding and Threaded
- B۱۶.۱۵ Cast Bronze Threaded Fittings
- B۱۶.۱۸ Cast Copper Alloy Solder Joint Pressure Fittings
- B۱۶.۲۲ Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
- B۱۶.۲۴ Cast Copper Alloy Pipe Flanges and Flanged Fittings
- B۱۶.۲۶ Cast Copper Alloy Fittings for Flared Copper Tubes
- B۱۶.۵۱ Copper and Copper Alloy Press-Connect Pressure Fittings
- B ۳۱.۵ Refrigeration Piping and Heat Transfer Components
ANSI(American National Standards Institute)
- ANSI Z۲۱.۴۷ - CSA ۲.۳: Gas-Fired Central Furnaces
- ANSI Z۲۲۳.۱/NFPA ۵۴: National Fuel Gas Code
ASHRAE(American Society of Heating, Refrigerating and AirConditioning Engineers,Inc.)
- ANSI/ASHRAE Standard ۱۵: Safety Standard for Refrigeration Systems.
- ANSI/ASHRAE Standard ۳۴: Designation and Safety Classification of Refrigerants.
- ANSI/ASHRAE Standard ۶۲.۱: Ventilation for Acceptable Indoor AirQuality.
- ANSI/ASHRAE Standard ۶۲.۲: Ventilation and Acceptable Indoor AirQuality in Low-Rise Residential Buildings
ASTM International
- A۵۳ Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless
- A۱۰۶ Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- A۲۵۴ Specification for Copper Brazed Steel Tubing
- A۵۳۹ Specification for Electric-resistance-welded Coiled Steel Tubing for Gas and Fuel Oil Lines.
- B۴۲ Specification for Electric-resistance-welded Coiled Steel Tubing for Gas and Fuel Oil Lines.
- B۴۳ Specification for Seamless Red Brass Pipe, Standard Sizes
- B۷۵ Specification for Seamless Copper Tube
- B۸۸ Specification for Seamless Copper Water Tube
- B۲۸۰ Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service .
- B۳۰۲ Specification for Threadless Copper Pipe, Standard Sizes
- D ۲۸۴۶ Specification for Chlorinated Poly Vinyl Chloride (CPVC) Plastic Hot and Cold Water Distribution Systems
- E۸۴ Standard Test Method for Surface Burning Characteristics of Building Materials
- F ۴۴۱ Specification for Chlorinated Poly Vinyl Chloride (CPVC) Plastic Pipe, Schedules ۴۰ and ۸۰.
- F ۴۴۲ Specification for Chlorinated Poly Vinyl Chloride (CPVC) Plastic Pipe (SDR-PR)
- F ۸۷۶ Specification for Cross-linked Polyethylene (PEX) Tubing
- F ۸۷۷ Specification for Cross-linked Polyethylene (PEX) Plastic Hot and Cold Water Distribution Systems
- F ۱۲۸۱ Specification for Cross-linked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
- F ۱۲۸۲ Standard Specification for Polyethylene/Aluminum/ Polyethylene (PE-AL-PE) Composite Pressure Pipe
- F ۱۹۷۴ Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Composite Pressure Pipe .
- F ۲۶۲۳ Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR ۹ Tubing۱
- F ۲۷۶۹ Polyethylene of Raised Temperature (PE-RT) Plastic Hot- and Cold- water Tubing and Distribution Systems
- BSI (British Standards Institution)
- BS ۶۱: Specification for threads for light gauge copper tubes and fittings
- BS ۲۶۳۳:Specification for Class I arc welding of ferritic steel pipework for carrying fluids
- BS ۲۷۹۰:Specification for design and manufacture of shell boilers of welded construction
- BS ۵۱۵۴: Specification for copper alloy globe, globe stop and check, check and gate valves
- BS ۷۲۹۱-۱: Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings. General requirements
- BS ISO ۷۱۲۱: Steel ball valves for general-purpose industrial applications
- CSA (Canadian Standards Association)
- F۳۷۹-۱ Solar Domestic Hot Water Systems (Liquid to Liquid Heat Transfer)
- ANSI Z۲۱.۴۷/CSA ۲.۳ Gas-fired central furnaces
- C۲۲.۱ Canadian Electrical Code
- DIN (German Institute for Standardization)
- DIN ۱۹۱۰-۱۱ Welding; terms dependent on materials for metal welding
- DIN ۱۹۱۰-۱۰۰ Welding and allied processes - Vocabulary - Part ۱۰۰: Metal welding processes
- DIN ۳۳۵۲-۵ Steel gate valves
- DIN ۴۱۰۲ Fire behaviour of building materials and building components
- DIN ۵۱۵۶ Machine taps for pipe threads
- DIN ۵۱۵۷ Sets of taps - Sets of ۲ taps for pipe threads
- DIN ۱۶۸۳۳: Polyethylene pipes of raised temperature resistance (PE-RT) -PE-RT Type I and PE-RT Type II - General quality requirements, testing
- DIN ۱۶۸۳۴: Polyethylene pipes of raised temperature resistance (PE-RT) -PE-RT Type I and PE-RT Type II - Dimensions
- DIN ۱۶۸۳۶: Multilayer pipes - Polyolefin-Aluminium-Multilayer pipes - General requirements and testing
- DIN ۱۶۸۳۷: Multilayer pipes - Plastics-Multilayer pipes - General quality requirements and testing
- DIN ۱۶۸۹۲: Crosslinked polyethylene (PE-X) pipes - General requirements, testing
- DIN ۱۶۸۹۳: Crosslinked polyethylene (PE-X) pipes - Dimensions
- DIN ۵۰۹۳۰-۶: Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of pipes, tanks and apparatus - Part ۶: Evaluation process and requirements regarding the hygienic suitability incontact with drinking water
EN (European Standards)
- EN ۱۲۵۲-۲ standard for capillary and compression fitting for copper tubes.
- BS EN ۵۵۸: Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valve
- BS EN ۵۹۳ : Industrial valves - Metallic butterfly valves for general purposes
- BS EN ۱۰۵۷: Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
- BS EN ۱۰۹۲-۱: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
- BS EN ۱۰۹۲-۲: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Cast iron flanges
- BS EN ۱۰۹۲-۳: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges
- BS EN ۱۰۹۲-۴: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Aluminium alloy flanges
- BS EN ۱۱۷۱: Industrial valves. Cast iron gate valves
- BS EN ۱۲۵۴-۱: Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes
- BS EN ۱۲۵۴-۲: Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with copper tubes
- BS EN ۱۲۵۴-۳: Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with plastics pipes
- BS EN ۱۲۵۴-۴: Copper and copper alloys. Plumbing fittings. Fittings combining other end connections with capillary or compression ends
- BS EN ۱۲۵۴-۵: Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes
- BS EN ۱۲۵۴-۶: Copper and copper alloys. Plumbing fittings. Fittings with push-fit ends
- BS EN ۱۲۵۴-۸: Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes
- BS EN ۱۵۰۳-۱: Valves. Materials for bodies, bonnets and covers. Steels specified in European Standards
- BS EN ۱۵۰۳-۲: Valves. Materials for bodies, bonnets and covers. Steels other than those specified in European Standards
- BS EN ۱۵۰۳-۳: Valves. Materials for bodies, bonnets and covers. Cast irons specified in European Standards
- BS EN ۱۵۰۳-۴: Valves. Materials for bodies, bonnets and covers. Copper alloys specified in European Standards
- BS EN ۱۹۸۴ Industrial valves - Steel gate valves
- BS EN ۲۰۸۲-۲:Standard for aluminium alloy forging stock and forgings.
- BS EN ۱۰۲۲۰ Seamless and welded steel tubes - Dimensions and masses per unit length
- BS EN ۱۰۲۲۶-۱:Pipe threads where pressure tight joints are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation
- BS EN ۱۰۲۲۶-۲:Pipe threads where pressure tight joints are made on the threads. Taper external threads and taper internal threads. Dimensions, tolerances and designation
- BS EN ۱۰۲۲۶-۳:Pipes threads where pressure-tight joints are made on the threads. Verification by means of limit gauges
- BS EN ۱۰۲۴۱: Steel threaded pipe fittings
- BS EN ۱۰۲۴۲: Threaded pipe fittings in malleable cast iron
- BS EN ۱۰۲۵۳-۱ Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements
- BS EN ۱۰۲۵۳-۲ Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
- BS EN ۱۰۲۵۵ Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods
- BS EN ۱۲۲۸۵-۱: Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
- BS EN ۱۲۲۸۵-۲: Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
- BS EN ۱۲۲۸۸ Industrial valves - Copper alloy gate valves
- BS EN ۱۲۵۰۲-۱: Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems- Part ۱: General
- BS EN ۱۲۵۰۲-۲ : Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems -
Part ۲: Influencing factors for copper and copper alloys
- BS EN ۱۲۵۰۲-۳ : Protection of metallic materials materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۳: Influencing factors for hot dipgalvanized ferrous materials
- BS EN ۱۲۵۰۲-۴ : Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۴: Influencing factors for stainless steels
- BS EN ۱۲۵۰۲-۵ : Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۵: Influencing factors for cast iron, unalloyed and lowalloyed steels
- BS EN ۱۲۶۹۳: Refrigerating systems and heat pumps. Safety andenvironmental requirements. Positive displacement refrigerant compressor.
- BS EN ۱۲۹۵۳-۱:Shell boilers. General.
- BS EN ۱۲۹۵۳-۲:Shell boilers. Materials for pressure parts of boilers and accessories
- BS EN ۱۲۹۵۳-۳ Shell boilers. Design and calculation for pressure parts.
- BS EN ۱۲۹۵۳-۴:Shell boilers. Workmanship and construction of pressure parts of the boiler
- BS EN ۱۲۹۵۳-۵:Shell boilers. Inspection during construction, documentation and marking of pressure parts of the boiler
- BS EN ۱۲۹۵۳-۶:Shell boilers. Requirements for equipment for the boiler
- BS EN ۱۲۹۵۳-۷:Shell boilers. Requirements for firing systems for liquid and gaseous fuels for theboilers
- BS EN ۱۲۹۵۳-۸:Shell boilers. Requirements for safeguards against excessive pressure
- BS EN ۱۲۹۵۳-۹:Shell boilers. Requirements for limiting devices of the boiler and accessories
- BS EN ۱۲۹۵۳-۱۰:Shell boilers. Requirements for feedwater and boiler water quality
- BS EN ۱۲۹۵۳-۱۱:Shell boilers. Acceptance tests
- BS EN ۱۲۹۵۳-۱۲:Shell boilers. Requirements for grate firing systems for solid fuels for the boiler
- BS EN ۱۲۹۵۳-۱۳:Shell boilers. Operating instructions
- BS EN ۱۳۷۰۹ Standard for Steel globe and globe stop and check valves.
- BS EN ۱۳۷۴۱ Thermal performance acceptance testing of mechanicaldraught series wet cooling towers
- BS EN ۱۳۷۸۹: Industrial valves. Cast iron globe valves
- BS EN ۱۴۶۱۰ : Welding and allied processes - Definitions of metal welding processes
- BS EN ۱۵۰۳۴:Heating boilers. Condensing heating boilers for fuel oil
- BS EN ۱۵۴۱۷: Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than ۷۰ kW
- BS EN ۱۵۵۰۱:Thermal insulation products for building equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification
- BS EN ۱۵۵۰۲-۱: Gas-fired heating boilers. General requirements and tests
- BS EN ۱۵۵۰۲-۲-۱: Gas-fired central heating boilers. Specific standard for type C appliances and type B۲, B۳ and B۵ appliances of a nominal heat input not exceeding ۱۰۰۰ kW
- BS EN ۱۶۷۶۷ Industrial valves. Steel and cast iron check valves
- DIN EN ۵۵۸: Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valve
- DIN EN ۵۹۳ : Industrial valves - Metallic butterfly valves for general purposes
- DIN EN ۱۰۵۷: Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
- DIN EN ۱۰۹۲-۱: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
- DIN EN ۱۰۹۲-۲: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Cast iron flanges
- DIN EN ۱۰۹۲-۳: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges
- DIN EN ۱۰۹۲-۴: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Aluminium alloy flanges
- DIN EN ۱۱۷۱: Industrial valves. Cast iron gate valves
- DIN EN ۱۲۵۴-۱: Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes
- DIN EN ۱۲۵۴-۲: Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with copper tubes
- DIN EN ۱۲۵۴-۳: Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with plastics pipes
- DIN EN ۱۲۵۴-۴: Copper and copper alloys. Plumbing fittings. Fittings combining other end connections with capillary or compression ends
- DIN EN ۱۲۵۴-۵: Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes
- DIN EN ۱۲۵۴-۶: Copper and copper alloys. Plumbing fittings. Fittings with push-fit ends
- DIN EN ۱۲۵۴-۸: Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes
- DIN EN ۱۹۸۴ Industrial valves - Steel gate valves
- DIN EN ۱۰۲۴۲: Threaded pipe fittings in malleable cast iron
- DIN EN ۱۰۲۵۵ Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods
- DIN EN ۱۲۲۸۵-۱: Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
- DIN EN ۱۲۲۸۵-۲: Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
- DIN EN ۱۲۲۸۸ Industrial valves - Copper alloy gate valves
- DIN EN ۱۲۵۰۲-۱: Protection of metallic materials against corrosion -Guidance on the assessment of corrosion likelihood in water distribution and storage systems- Part ۱: General
- DIN EN ۱۲۵۰۲-۲ : Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۲: Influencing factors for copper and copper alloys
- DIN EN ۱۲۵۰۲-۳ : Protection of metallic materials materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۳: Influencing factors for hot dipgalvanized ferrous materials
- DIN EN ۱۲۵۰۲-۴ : Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۴: Influencing factors for stainless steels
- DIN EN ۱۲۵۰۲-۵ : Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part ۵: Influencing factors for cast iron, unalloyed and lowalloyed steels
- DIN EN ۱۲۶۹۳: Refrigerating systems and heat pumps. Safety andenvironmental requirements. Positive displacement refrigerant compressor.
- DIN EN ۱۲۹۵۳-۱:Shell boilers. General
- DIN EN ۱۲۹۵۳-۲:Shell boilers. Materials for pressure parts of boilers and accessories
- DIN EN ۱۲۹۵۳-۳ Shell boilers. Design and calculation for pressure parts.
- DIN EN ۱۲۹۵۳-۴:Shell boilers. Workmanship and construction of pressure parts of the boiler
- DIN EN ۱۲۹۵۳-۵:Shell boilers. Inspection during construction,documentation and marking of pressure parts of the boiler
- DIN EN ۱۲۹۵۳-۶:Shell boilers. Requirements for equipment for the boiler
- DIN EN ۱۲۹۵۳-۷:Shell boilers. Requirements for firing systems for liquid and gaseous fuels for the boilers
- DIN EN ۱۲۹۵۳-۸:Shell boilers. Requirements for safeguards against excessive pressure
- DIN EN ۱۲۹۵۳-۹:Shell boilers. Requirements for limiting devices of the boiler and accessories
- DIN EN ۱۲۹۵۳-۱۰:Shell boilers. Requirements for feedwater and boiler water quality
- DIN EN ۱۲۹۵۳-۱۱:Shell boilers. Acceptance tests
- DIN EN ۱۲۹۵۳-۱۲:Shell boilers. Requirements for grate firing systems for solid fuels for the boiler
- DIN EN ۱۲۹۵۳-۱۳:Shell boilers. Operating instructions
- DIN EN ۱۳۷۰۹ Standard for Steel globe and globe stop and check valves.
- DIN EN ۱۳۷۴۱ Thermal performance acceptance testing of mechanical draught series wet cooling towers
- DN EN ۱۳۷۸۹: Industrial valves. Cast iron globe valves
- DIN EN ۱۴۶۱۰ : Welding and allied processes - Definitions of metal welding processes
- DIN EN ۱۵۰۳۴:Heating boilers. Condensing heating boilers for fuel oil
- DIN EN ۱۵۵۰۱:Thermal insulation products for building equipment and
industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification
- DIN EN ۱۵۵۰۲-۱: Gas-fired heating boilers. General requirements and tests
- DIN EN ۱۵۵۰۲-۲-۱: Gas-fired central heating boilers. Specific standard for type C appliances and type B۲, B۳ and B۵ appliances of a nominal heat input not exceeding ۱۰۰۰ kW
- DIN EN ۱۶۷۶۷ Industrial valves. Steel and cast iron check valves
- NF EN ۱۲۳۰۴:standard for Steel Plug Valves
ISO (International Organization for Standardization)
- ISO ۷.۱ : Pipe threads where pressure-tight joints are made on the threads -- Part ۱: Dimensions, tolerances and designation
- ISO ۴۹: Malleable cast iron fittings threaded to ISO ۷-۱
- ISO ۶۵: Carbon steel tubes suitable for screwing in accordance with ISO ۷-۱
- ISO ۲۷۴ : Copper tubes of circular section -- Dimensions
- ISO ۲۰۱۶ : Capillary solder fittings for copper tubes; Assembly dimensions and tests
- ISO ۳۴۱۹ : Non-alloy and alloy steel butt-welding fittings
- ISO ۴۱۴۵ : Non-alloy steel fittings threaded to ISO ۷/۱
- ISO ۴۲۰۰: Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length
- ISO ۵۹۹۶ : Cast iron gate valves
- ISO ۷۰۰۵-۱ : Pipe flanges - Part ۱: Steel flanges for industrial and general service piping systems
- ISO ۷۰۰۵-۲ : Metallic flanges; part ۲: cast iron flanges
- ISO ۷۰۰۵-۳ : Metallic flanges; part ۳: copper alloy and composite flanges
- ISO ۱۰۲۹۴-۱ : Fire resistance tests - Fire dampers for air distribution systems - Part ۱: Test method
- ISO ۱۰۲۹۴-۲ : Fire resistance tests - Fire dampers for air distribution systems - Part ۲: Classification, criteria and field of application of test results
- ISO ۱۰۲۹۴-۳ : Fire resistance tests - Fire dampers for air distribution systems - Part ۳: Guidance on the test method
- ISO ۱۰۲۹۴-۴ : Fire resistance tests - Fire dampers for air distribution systems - Part ۴: Test of thermal release mechanism
- ISO ۱۰۲۹۴-۵ : Fire resistance tests - Fire dampers for air distribution systems - Part ۵: Intumescent fire dampers
- ISO ۱۵۸۷۵-۱ : Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part ۱: General
- ISO ۱۵۸۷۵-۲ : Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part ۲: Pipes
- ISO ۱۵۸۷۵-۳ : Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part ۳: Fittings
- ISO ۱۵۸۷۵-۵ : Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part ۵: Fitness for purpose of the system
- ISO ۲۱۰۰۳-۱ : Multilayer piping systems for hot and cold water installations inside buildings - Part ۱: General
- ISO ۲۱۰۰۳-۲ : Multilayer piping systems for hot and cold water installations inside buildings - Part ۲: Pipes
- ISO ۲۱۰۰۳-۳ : Multilayer piping systems for hot and cold water installations inside buildings - Part ۳: Fittings
- ISO ۲۱۰۰۳-۵ : Multilayer piping systems for hot and cold water installations inside buildings - Part ۵: Fitness for purpose of the system
- ISO ۲۲۳۹۱-۱ : Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part ۱: General
- ISO ۲۲۳۹۱-۲ : Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part ۲: Pipes
- ISO ۲۲۳۹۱-۳ : Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part ۳: Fittings
- ISO ۲۲۳۹۱-۵ : Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part ۵: Fitness for purpose of the system
JIS(Japanese Industrial Standards)
- JIS B ۲۰۱۱: Bronze gate, globe, angle, and check valves
- JIS B ۲۰۳۱: Gray cast iron valves
- JIS B ۲۰۷۱ : Steel valves
MSS (Manufacturers Standardization Society)
- MSS SP-۸۰ :Bronze Gate, Globe, Angle and Check Valves
NFPA (National Fire Protection Association)
- NFPA ۱: Fire Code
- NFPA ۳۰: Flammable and Combustible Liquids Code
- NFPA ۳۱: Standard for the Installation of Oil Burning Equipment
- NFPA ۳۷: Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
- NFPA ۵۴: National Fuel Gas Code
- NFPA۷۰: National Electrical Code
- NFPA۷۲: National Fire Alarm and Signaling Code
- NFPA ۸۸A: Standard for Parking Structures
- NFPA ۴۰۹: Standard on Aircraft Hangars
UL (Underwriters Laboratories)
- UL ۵۸ Standard for Steel Underground Tanks for Flammable and Combustible Liquids
- UL ۸۰ Standard for Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids
- UL ۱۲۷ Standard for Factory-Built Fireplaces
- UL ۱۴۲ Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids
- UL ۱۷۴ Standard for Household Electric Storage Tank Water Heaters
- UL ۱۸۰ Standard for Liquid-Level Gauges for Oil Burner Fuels and Other Combustible Liquids
- UL ۱۸۱ Standard for Factory-Made Air Ducts and Air Connectors
- UL ۲۰۷ Standard for Refrigerant-Containing Components and Accessories, Nonelectrical
- UL ۲۶۸ Smoke Detectors for Fire Alarm Systems
- UL ۲۶۸A Standard for Smoke Detectors for Duct Application
- UL ۳۴۳ Standard for Pumps for Oil-Burning Appliances
- UL ۴۱۲ Standard for Refrigeration Unit Coolers
- UL ۴۴۳ Standard for Steel Auxiliary Tanks for Oil-Burner Fuel
- UL ۴۷۱ Standard for Commercial Refrigerators and Freezers
- UL ۴۹۹ Standard for Electric Heating Appliances
UL ۵۳۶ Standard for Flexible Metallic Hose
- UL ۵۵۵ Standard for Fire Dampers
-UL ۵۵۵S Standard for Smoke Dampers
-UL ۷۲۳ Standard for Test for Surface Burning Characteristics of Building Materials
- UL ۷۲۷ Standard for Oil-Fired Central Furnaces
- UL ۷۲۹ Standard for Oil-Fired Floor Furnaces
- UL ۸۶۷ Standard for Electrostatic Air Cleaners
- UL ۹۰۰ Standard for Air Filter Units
- UL ۹۰۷ Standard for Fireplace Accessories
- UL ۱۰۴۶ Standard for Grease Filters for Exhaust Ducts
- UL ۱۳۱۶ Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures
- UL ۱۴۵۳ Standard for Electric Booster and Commercial Storage Tank Water Heaters
- UL ۱۸۱۲ Standard for Ducted Heat Recovery Ventilators
- UL ۱۸۱۵ Standard for Nonducted Heat Recovery Ventilators
- UL ۱۹۹۵ Heating and Cooling Equipment
- UL ۲۰۴۳ Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces
تصویر ۱